openGear Workflow Products
Video Distribution | Conversion | Power Management
OG-12G-2FSC
Dual Fiber to 12G-SDI​
OG-12G-2SFC
Dual 12G-SDI to Fiber​
OG-3G-2FSC
Dual Fiber to 3G-SDI​
OG-3G-2SFC
Dual 3G-SDI to Fiber​
Optical Fiber Converters:
Osprey’s openGear SDI/Fiber Optic converters allow transport for 3G/12G-SDI signals over distances up to 10km (20km for 3G-SDI) with Single-Mode fiber optic cable. Formats up to 4K are supported with embedded metadata passthrough.
OG-12G-4DA
1x4 12G-SDI Distribution Amp​
12G-SDI Distribution Amplifier:
One input is distributed to four re-clocking non-inverting outputs. The input equalizer supports cable lengths of up to 100m at 12G-SDI (Belden 4855R). The input format is auto detected and all metadata passed through to the four outputs.
OG-PWR-28W
5V/12V Distribution​
Power Distribution:
OG-PWR-28W eliminates wall wart power supplies for frame external accessories like mini converters, monitors, switchers, etc. For added reliability, it supplies redundant power when the OGx or OG3 frame is equipped with a second power supply. The output status can be monitored for overcurrent with the on-board LED’s or through the Dashboard status page.
Dual Fiber to 12G-SDI Converter | OG-12G-2FSC | SKU 95-00534
Video Inputs
2x LC Single Mode Fiber Optics​
​​
Video Outputs
2x 12G-SDI (HD-BNC)
Video Inputs
-----------------------------------------------------------------------------------------------
Single Mode Fiber (9um/125um)
Duplex LC Connector
Wavelength 1270nm through 1610nm
Sensitivity -14dBm at 12G-SDI
Video Outputs
-----------------------------------------------------------------------------------------------
2 x 12G-SDI (HD-BNC)
Standards
-----------------------------------------------------------------------------------------------
SMPTE-259/292/424/2081/2082 and DVB-ASI
Support for HDR
Reclocking
-----------------------------------------------------------------------------------------------
Integrated reclocker
Visual Indicators
-----------------------------------------------------------------------------------------------
Front LEDs for Power and Signal Lock Status
Power
-----------------------------------------------------------------------------------------------
3W max
Size
-----------------------------------------------------------------------------------------------
openGear Standard
Single Slot (one rear module can accommodate 2 cards)
Environment
-----------------------------------------------------------------------------------------------
Operating Temperature: 0 to 40 C (32 to 104 F)
Storage Temperature -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: < 3000m (<10,000ft)
User Interface
-----------------------------------------------------------------------------------------------
openGear Dashboard control – Windows, Linux, macOS
Signal Lock Status
Card State
Frame Connection State
Manufacturer and Product Information
​
openGear Compatibility
-----------------------------------------------------------------------------------------------
OGx and OG3 up to 20 cards per frame
DFR8321 up to 10 cards per frame
In the box
-----------------------------------------------------------------------------------------------
openGear Card
Rear Module
Mounting Hardware
Dual 12G-SDI to Fiber Converter | OG-12G-2SFC | SKU 95-00536
Video Inputs
2x 12G-SDI (HD-BNC)​
​​
Video Outputs
2x LC Single Mode Fiber Optics
Video Inputs
-----------------------------------------------------------------------------------------------
2 x 12G-SDI (HD-BNC)
Video Outputs
-----------------------------------------------------------------------------------------------
Single Mode Fiber (9um/125um), Duplex LC Connector
Wavelength 1310nm
Optical Power min -5dBm
Extinction Ratio higher than 6dB
Standards
-----------------------------------------------------------------------------------------------
SMPTE-259/292/424/2081/2082 and DVB-ASI
Support for HDR
​
Reclocking
-----------------------------------------------------------------------------------------------
Integrated reclocker
Cable Equalization (Belden 1694A)
-----------------------------------------------------------------------------------------------
12Gbps 50m
6Gbps 100m
3Gbps 150m
1.5Gbps 265m
270Mbps 530m
Visual Indicators
-----------------------------------------------------------------------------------------------
Front LEDs for Power and Signal Lock Status
Power
-----------------------------------------------------------------------------------------------
3W max
Size
-----------------------------------------------------------------------------------------------
openGear Standard
Single Slot (one rear module can accommodate 2 cards)
Environment
-----------------------------------------------------------------------------------------------
Operating Temperature: 0 to 40 C (32 to 104 F)
Storage Temperature -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: < 3000m (<10,000ft)
User Interface
-----------------------------------------------------------------------------------------------
openGear Dashboard control – Windows, Linux, macOS
Signal Lock Status
Card State
Frame Connection State
Manufacturer and Product Information
​
openGear Compatibility
-----------------------------------------------------------------------------------------------
OGx and OG3 up to 20 cards per frame
DFR8321 up to 10 cards per frame
In the box
-----------------------------------------------------------------------------------------------
openGear Card
Rear Module
Mounting Hardware
Dual Fiber to 3G-SDI Converter | OG-3G-2FSC | SKU 95-00535
Video Inputs
2x LC Single Mode Fiber Optics​
​​
Video Outputs
2x 3G-SDI (HD-BNC)
Video Inputs
-----------------------------------------------------------------------------------------------
Single Mode Fiber (9um/125um)
Duplex LC Connector
Wavelength 1270nm through 1610nm
Sensitivity -24dBm at 3G-SDI
Video Outputs
-----------------------------------------------------------------------------------------------
2 x 3G-SDI (HD-BNC) - 2 parallel outputs for each input
Standards
-----------------------------------------------------------------------------------------------
SMPTE-259/292/424 and DVB-ASI
Support for HDR
​
Visual Indicators
-----------------------------------------------------------------------------------------------
Front LEDs for Power and Signal Lock Status
Power
-----------------------------------------------------------------------------------------------
2.5W max
Size
-----------------------------------------------------------------------------------------------
openGear Standard
Single Slot (one rear module can accommodate 2 cards)
Environment
-----------------------------------------------------------------------------------------------
Operating Temperature: 0 to 40 C (32 to 104 F)
Storage Temperature -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: < 3000m (<10,000ft)
User Interface
-----------------------------------------------------------------------------------------------
openGear Dashboard control – Windows, Linux, macOS
Signal Lock Status
Card State
Frame Connection State
Manufacturer and Product Information
​
openGear Compatibility
-----------------------------------------------------------------------------------------------
OGx and OG3 up to 20 cards per frame
DFR8321 up to 10 cards per frame
In the box
-----------------------------------------------------------------------------------------------
openGear Card
Rear Module
Mounting Hardware
Dual 3G-SDI to Fiber Converter | OG-3G-2SFC | SKU 95-00539
Video Inputs
2x 3G-SDI (HD-BNC)​
​​
Video Outputs
2x LC Single Mode Fiber Optics
Video Inputs
-----------------------------------------------------------------------------------------------
2 x 3G-SDI (HD-BNC)
Video Outputs
-----------------------------------------------------------------------------------------------
Single Mode Fiber (9um/125um)
Duplex LC Connector
Wavelength 1310nm
Optical Power min -5dBm
Extinction Ratio higher than 7dB
Standards
-----------------------------------------------------------------------------------------------
SMPTE-259/292/424 and DVB-ASI
Support for HDR
Reclocking
-----------------------------------------------------------------------------------------------
Integrated reclocker
Cable Equalization (Belden 1694A)
-----------------------------------------------------------------------------------------------
3Gbps 150m
1.5Gbps 265m
270Mbps 530m
Visual Indicators
-----------------------------------------------------------------------------------------------
Front LEDs for Power and Signal Lock Status
Power
-----------------------------------------------------------------------------------------------
3W max
Size
-----------------------------------------------------------------------------------------------
openGear Standard
Single Slot (one rear module can accommodate 2 cards)
Environment
-----------------------------------------------------------------------------------------------
Operating Temperature: 0 to 40 C (32 to 104 F)
Storage Temperature -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: < 3000m (<10,000ft)
User Interface
-----------------------------------------------------------------------------------------------
openGear Dashboard control – Windows, Linux, macOS
Signal Lock Status
Card State
Frame Connection State
Manufacturer and Product Information
​
openGear Compatibility
-----------------------------------------------------------------------------------------------
OGx and OG3 up to 20 cards per frame
DFR8321 up to 10 cards per frame
In the box
-----------------------------------------------------------------------------------------------
openGear Card
Rear Module
Mounting Hardware
1x4 12G-SDI Distribution Amplifier | OG-12G-4DA | SKU 95-00533
Video Input
1x 12G-SDI (HD-BNC)​
​​
Video Outputs
4x 12G-SDI (HD-BNC)
Video Input
-----------------------------------------------------------------------------------------------
1 x 12G-SDI (HD-BNC)
Video format auto detect
Video Outputs
-----------------------------------------------------------------------------------------------
4 x 12G-SDI (HD-BNC)
Non-Inverting
Standards
-----------------------------------------------------------------------------------------------
SMPTE-259/344/424/2081/2082 and DVB-ASI
Support for HDR
​
Cable Equalization (Belden 1694A)
-----------------------------------------------------------------------------------------------
12Gbps 75m
6Gbps 100m
3Gbps 220m
1.5Gbps 265m
270Mbps 530m
​
Reclocking
-----------------------------------------------------------------------------------------------
Integrated reclocker with loop filter
Visual Indicators
-----------------------------------------------------------------------------------------------
Front LED’s for Power and Signal Lock Status
Rear LED for Signal Lock Status
Power
-----------------------------------------------------------------------------------------------
2W max
Size
-----------------------------------------------------------------------------------------------
openGear Standard
Single Slot (one rear module can accommodate 2 cards)
Environment
-----------------------------------------------------------------------------------------------
Operating Temperature: 0 to 40 C (32 to 104 F)
Storage Temperature -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: < 3000m (<10,000ft)
User Interface
-----------------------------------------------------------------------------------------------
openGear Dashboard control – Windows, Linux, macOS
Signal Lock Status
Card State
Frame Connection State
Manufacturer and Product Information
​
openGear Compatibility
-----------------------------------------------------------------------------------------------
OGx and OG3 up to 20 cards per frame
DFR8321 up to 10 cards per frame
In the box
-----------------------------------------------------------------------------------------------
openGear Card
Rear Module
Mounting Hardware
5V/12V Power Distribution | OG-PWR-28W | SKU 95-00537
Outputs
Output 1: 5VDC and 12VDC​
Output 2: 5VDC and 12VDC​
Redundant Power
​
Ports
4x USB A for 5VDC
2x Screw Terminals for 5VDC
2x Screw Terminals for 12VDC
Power Output
-----------------------------------------------------------------------------------------------
Output 1: 8W (1.6A) max shared between 5V terminal block and USB Ports
or 14.4W (1.2A) max on 12V terminal block.
Output 2: 8W (1.6A) max shared between 5V terminal block and USB Ports
or 14.4W (1.2A) max on 12V terminal block.
​
Power redundancy if the frame is equipped with a second power supply
Overcurrent and Short Circuit protection
Power Ports
-----------------------------------------------------------------------------------------------
Out 1: Terminal Block for 12V, Terminal Block for 5V plus 2x USB A
Out 2: Terminal Block for 12V, Terminal Block for 5V plus 2x USB A
Size
-----------------------------------------------------------------------------------------------
openGear Standard
Two Slots
Power
-----------------------------------------------------------------------------------------------
1W at standby
30W max (includes maximum output load of 28.8W)
Environment:
-----------------------------------------------------------------------------------------------
Operating Temperature: 0 to 40 C (32 to 104 F)
Storage Temperature -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: < 3000m (<10,000ft)
User Interface
-----------------------------------------------------------------------------------------------
openGear Dashboard control – Windows, Linux, macOS
Output Overcurrent Status
Card State
Frame Connection State
Manufacturer and Product Information
Front buttons for overcurrent reset
openGear Compatibility
-----------------------------------------------------------------------------------------------
OGx and OG3 up to 10 cards per frame
In the box
-----------------------------------------------------------------------------------------------
openGear Card
Rear Module
Mounting Hardware
